F&P 12mm M.S. CTL Lines (New) #4910.1

Ref.: 11840-23/SR REV.1

< Click to enlarge images

This is a 20m / minute well priced flying shear type cut to length line that we build.

Workable material thicknesses: 6--12mm with a single leveler, 1.5--12mm with two levelers. 30ton decoiler. 20m / minute workspeed.

It is a "basic" line, for which we can quickly make you a proposal if its characteristics are right for you.

Process Material:                                                                  

Hot Rolled Steel - Steel grade: Q235, 12Mn

Tensile strength max 590 N/mm2

Yield strength max 460 N/mm2

Max elongation 20%

Material Thickness:                                                              

1.5÷12mm

Coils:

Weight max 30.000kg

Internal diameter 500-840mm 

External diameter max 2.000mm

Product:

500--6.000mm long x 500--2100mm wide sheets, in max. 10.000kg stacks

Line workspeed:

3 to 20m / minute

(Introduction speed:

0 to 5m / minute)

Equipment list:

  1. Coil storage

  2. Hydraulic coil car, floor pit type

  3. Anti-coilbreak self-centering decoiler, "stepped" type

  4. Hold-down with threading table, incorporated straightener and crop shear.

  5. Trimming unit + scrap baler (optional)

  6.  4-HI 11-Roll Leveler (6-12mm)

  7. Flying shear, with sheet run-out belt conveyor and pinch roll

  8. Product-inspection conveyor, 4.500mm

  9. Run-out pinch roll

10.  Stacker with rolls - Length: 6.000 mm.

11. Exit run-out table + weighing machine

Other options:

a)    Brushing machine

b)    4-HI 19-Roll Leveler (1.5-6mm)

"Standard" electrics, hydraulics and pneumatics:

Three-phase tension                                             

380 V  50 Hz 

Auxiliary tension                                                     

110 V  50 Hz 

Electro-valves tension                                             

24 V  50 Hz 

Hydraulic power pack

Pressure of nominal operation 100 to 105 bars

Pneumatics

Pressure of nominal operation 6 bars

-