F&P-FIMI 1000x3mm S.S. 2-Head Slitting Line #0072

LIKE NEW FULLY REVAMPED

- Material thickness range : mm .30 ÷ 3.00

- Tensile strength : N/mm² 450

- Coil max width : mm 1000

- Coil max weight in entry and exit : kg 12500

- Coil max outside diameter at entry and exit : mm 1650

- Coil inside diameter on decoiler : mm 508, & 610 using spacers

- Coil inside diameter on recoiler : mm 508

- Line max speed : m/min 150

- Feed speed : m/min 10

- Line direction : Left to Right

- Number of cuts with thickness mm 0,30 - 0,80 : n. 35

- Number of cuts with thickness mm 1 : n. 27

- Number of cuts with thickness mm 1,5 : n. 13

- Number of cuts with thickness mm 2 : n 7

- Number of cuts with thickness mm 2,5 : n. 4

- Number of cuts with thickness mm 3 : n. 3

- Min. width of slit strip : mm 20

- Minimum side-scrap width : mm 5 up to 1 mm thick material

(in any case: at least 3 times the material thickness)

- Work eference : line center

EQUIPMENT & TOOLING LIST:

Item 1.1 COIL LOADING CAR

Item 2.1 DECOILER

Item 2.2 ONE SET OF SPACERS FOR DECOILER

Item 2.3 PAPER WINDER

Item 3.1 COIL OPENING TABLE

Item 3.2 ENTRY PINCH ROLLS

Item 3.3 CROP SHEAR

Item 3.4 RUBBER COATED STABILIZING ROLLS

Item 4.1 DUAL HEAD SLITTING SHEAR (shaft ø140 mm)

Item 5.1 SCRAP BALER

Item 6.1 BURR-MASHING ROLLS

Item 6.2 TENSIONING PINCH ROLLS

Item 6.3 QUADRANT LOOP ROLL TABLES

Item 7.1 TENSION PAD (FELT PRESS) ON CARRIAGE

Item 7.2 SEPARATORS DISCS, HOLDING SHAFT ON CARRIAGE

Item 7.3 TENSIONING ROLL BRIDLE ON CARRIAGE

Item 7.4 DEFLECTING ROLL ON CARRIAGE

Item 8.1 RECOILER

Item 9.1 COIL UNLOADING CAR

Item 10.1 PNEUMATICS

Item 10.2 HYDRAULICS

Item 10.3 ELECTRICS

Item 10.4 "TELE-SERVICE" CONNECTION (for remote assistance)

Item 11 SAFETY FENCING

Item 12 SLITTER TOOLING

-