F&P Laserschneidanlagen für Coils
![New F&P Laserschneidanlagen für Coils](https://i.machineryhost.com/577ef1154f3240ad5b9b413aa7346a1e/a234b89e78b1556c8ed66dc65d1a60da/large-new-f-and-p-laserschneidanlagen-fuer-coils.jpg)
F&P Laserschneidanlagen für Coils
Description
< CLICK TO ENLARGE IMAGES
1020mm / 1270mm / 1550mm x 2mm
2kW
25m / minute
Advantages of our laser cutters
- High speed cutting of different materials like Steel, Galvanized, Aluzinc, Plastisol, Aluminum, Stainless steel, etc. (max thickness: 2.0 mm)
- Max. speed 25 m/min. Accuracy, +/- .2 mm, including holes
- Any parts that can be drawn by a CAD program, can to be cut
- Few maintenance, acceptable energy consumption with the fiber laser. We only use high quality IPG laser sources and Precitec cutting heads
- Limited noise during operation
- The sheets are moved by a linear drive by pneumatic clamps, forwards and backwards with a very accurate movement and few risks of crashes
- Easy operation by touch screen
- In lieu of Nitrogen we use compressed air, much easier and cheaper to supply to the machine. Just a good compressor with approx. 650 ltr/min capacity and air drier suffices. (We supply a booster to get sufficient pressure)
- We offer a wide variety of optional equipment to customize the machines
The machines are programmed by independent software, for developing and programming. We offer the most used Autodesk Camduct or Eurosoft software, but using other systems is possible with the universal CNC control of the machine
After ending a cutting program, the sheet is cut off and pushed out of the machine. Next program can be started automatically
Autodesk Camduct or Eurosoft Cutexpert ^:
Very efficient programming of standard parts for insulation cladding or HVAC, independent from the machine. Programming possible in the workshop or at office
Complete library with parts and fittings for Insulation cladding and air ductwork
Run on a Windows PC, offline from machine: allowing a high occupancy rate
A library with preference-parts can be made by the operator
Standard parts can be stored in any default, just to minimize programming time
Supplements for seams and connectors can be programmed and stored in infinite numbers, with or without fixing holes and notches
Data input of data quick and uncluttered, with clear 3D views of parts
Developments can quickly be monitored and, even changed before accepting
Different parts can be combined
Automatic or manual dividing of those developments too big to be cut in one piece
2D Drawing module
DXF and DWG import and export
Automatic and manual nesting
Clear lists can be printed to organize production
Cost calculation modules
Project administration
Programs can also be made for other cutting machines (plasma or laser); tube program for cutting tube developments
Using full sheet width
With or without fixing holes. The number of holes is adjustable
Diameter of holes also adjustable; supplements, and the distance of hole to end of tube adjustable
Fixing holes can be cut conical
Standard Coil Fed Laser Cutting Machine type 2010-20
. >> A demonstration machine of this Model is always visible at our plant .
1020mm
2kW
25m / minute
Manual decoiler type ASF open-ended / 1000kg x 1000mm most used
Air compressor, screw type, Creemers RCA 5,5/200 Compactair; with tank and air dryer
Extractor with automatically cleaned filters, 1000-1600 m3/hour incl. spark shield
(excluding Atex and Excluding piping to the machine)
Programming software Autodesk Camduct rental licence per year tube cutting programming
and:
Cutting machine with control system, servo drives and Precitec cutting head
IPG Laser source, placed under the machine: type YLS 2000 U
IPG Chiller for the laser source
Pneumatic feed-in table between straightener and laser, under loop
Feeding rolls, which take out the cut sheet automatically
Roll-off table with rollers, length 2m
Booster to increase the air pressure for cutting with air ^
Straightener with 5 work rolls + 2 rubberized feeding rolls. Capacity: 1020mm x 1.5mm (St 37)
Start–stop control with dancing arm
Options:
Manual decoiler with loose mandrel on wheels, 1500 kg - Model AS
Manual decoiler with loose mandrel, 5000 kg - Model AS
Manual decoiler, open ended 1000mm x 2000 kg, single - Model 2910
Motorized decoiler, open ended, 2000 kg hydraulic mandrel - Type 2952
Multiple decoilers with selector system
3m roll-off table in lieu of 2m
4m roll-off table in lieu of 2m
CAD / CAM software:
Eurosoft Cut Expert Stand-alone License
Autodesk Camduct yearly License
Software training, per day in our house or online
Standard Coil Fed Laser Cutting Machine type 2012-20
1270mm
2kW
25m / minute
Cutting machine with control system, servo drives and Precitec cutting head
IPG Laser source placed under the machine, type YLS U
Chiller for cooling the laser source
Pneumatic feed-in table under loop
Feeding rolls which automatically take out the cut sheet
Roll-off table with rollers, length 2m
Booster to increase the air pressure for cutting with air.
Straightener with 5 work rolls + 2 rubberized feeding rolls. Capacity: 1270mm x 1.25mm (St 37)
Start – stop control with dancing arm
Options:
Manual decoiler with loose mandrel on wheels, 1500 kg - 1250mm
Manual decoiler with loose mandrel on wheels, 5000 kg x 1250mm
Manual decoiler, open ended 1250mm x 1000 kg
Manual decoiler, open ended, 1250mm x 2000 kg single - Type 2900
Motorized decoiler, open ended, 3000 kg hydraulic mandrel
Multiple decoilers with selector system
Extractor with automatically cleaned filters, Ca. 2000 m3/hr. incl. spark shield and incl. noise damper
3m roll-off table in lieu of 2m
4m roll-off table in lieu of 2m
CAD / CAM software:
Eurosoft Cut Expert Stand-alone License
Autodesk Camduct perpetual license
On site training / Installation/ junior Consultant, per day
Tube program for cutting tube developments:
Using the full sheet width 1000 or 1250 mm
The length can be cut into 2 equal pieces
With or without fixing holes
Number of holes is adjustable
Diameter of the holes is adjustable
Supplements and the distance of hole to the end of the tube is adjustable
Fixing holes can be cut conical
To be arranged by customer:
PC or Laptop for CAD/CAM software
Printer for printing the nestings
Screw compressor with chiller for drying the air. Cap. 650 l/min and 10 bar
Electrical connections 400V total ca. 21 kW
Flat concrete floor
Standard Coil Fed Laser Cutting Machine type 2015-20
1550mm
2kW
25m / minute
Advantages and features of coil fed laser cutters generally and, of these particular machines:
It can work without interruptions, given the continue supply of material. Efficient material consumption and low waste
The products remain fixed by microjoints. These joints can be adjusted on the machine easily. The products can then be
broken out, at the end, very easily
Very longs parts can be produced (theoretical, of unlimited length)
The IPG fibre laser sources we use are very modern and assure:
o optimal cutting performances with carbon steel, aluminium, stainless steel...
o low energy consumption
o reduced maintenance costs with glass fibre cable and no mirrors
Laser source^: power 2,0 kW; type: YLS 2000 U - Brand: IPG
Robust Precitec cutting head, type: Light Cutter - with easy manual adjusting of the focus height, automatic height
adjustment, protection glass inside
Sigmatek machine control system and motion control operated by touch screen on left side of machine
The machine configuration can be modified easily on customers’ demand
The sheet moves on rollers, scratches are avoided
The machine can be connected to more decoilers with a selector to change from one to another easily
High cutting speed, up to 25m / min
Very good performances with compressed air, for material up to 1mm thick. This requires a high volume compressor* and
chiller, and a booster to increase the pressure in sheet metal. (* 7.5 kW screw type compressor with 10 bar capacity)
The machine is very compact and needs little space in the workshop
Cutting machine with control system, servo drives and Precitec cutting head
IPG Laser source placed under the machine, type YLS U
Chiller for cooling the laser source
Pneumatic feed-in table under loop
Feeding rolls which automatically take out the cut sheet
Roll-off table with rollers, length 2m
Booster to increase the air pressure for cutting with air
Straightener with 5 work rolls + 2 rubberized feeding rolls. Capacity: 1550mm x 1.25mm (St 37)
Start – stop control with dancing arm
Options:
Single, manual decoiler with brake 5000 kg x 1500 mm (H frame, bearings at both sides of the coil)
Single motorized Decoiler, 3000 kg x 1500 mm (open ended decoiler with hydraulic mandrel, excl. coil car)
Single motorized decoiler, 5000 kg x 1500 mm (open ended decoiler with hydraulic mandrel, excl. coil wagon)
Multiple decoilers with selector system, manual or automatic
Extractor with automatically cleaned filters, ca. 2000 m3/hr. incl. spark shield and incl. noise damper
3m roll-off table in lieu of 2m
4m roll-off table in lieu of 2m
CAD / CAM software:
Eurosoft Cut Expert Stand-alone License
Autodesk Camduct perpetual license
On site training / Installation/ junior Consultant, per day
Tube program for cutting tube developments:
Using the full sheet width 1000 or 1250 or 1500 mm
With or without fixing holes
Number of holes is adjustable
Diameter of the holes is adjustable
Supplements and the distance of hole to the end of the tube is adjustable
Fixing holes can be cut conical
To be arranged by customer:
PC or laptop (Windows) for installing CAD / CAM
Compressor incl. drier cap. Ca. 650 l/min, pressure between 8 -10 bar
Flat concrete floor
Power supply 400V- 50/60 Hz with more connections
The ducting material and assembling of the extractor.
Internet connection to the laptop and machine for online assist
-
Specifications
Manufacturer | F&P |
Model | Laserschneidanlagen für Coils |
Condition | New |