F&P Two Dia. Mill + Shrink-Wrapping Equip. #4377

FOR SEAMED DOWNPIPES

OF ALUMINIUM, PREPAINTED MATERIALS, STAINLESS STEEL, TITANZINC, ZINC - .55mm to .80mm thick

STOP/START TYPE

Max.: 20m / minute

Layout dwg. in the Attach. at the bottom

COMPOSITION:

POWERED DECOILER

• of allsteel construction with heavy duty bearings
• 400mm max. coil width
• 3 ton load capacity
• Coil ID: 470-520mm
• Mechanical mandrel drum closing/opening; hydraulic optional
• 2.2kW drive motor
• COIL CAR optional

ROLL FORMER

• 13 station
• 70mm shaft diameter
• 800mm roll space
• speed 0-20m / minute, variable
• 18kW drive motor -- D.C. or, alt. A.C. (12kW) with inverter

ROLL TOOLING

• 2 sets of rolls mounted "parallel" to each other for different pipe diameters on demand: for example 80mm + 100mm, or 87mm + 90mm, or 100mm + 120mm...
• all rolls of tempered steel with partial grinding and complete with spacers; marked with: the station number, the progressive number, their position

STATIC HYDRAULIC POWER CUTOFF UNIT

• with allsteel tool-holding bed, tooling for two pipe diameters ^
• the cutting operation is by knife, with scrap
• 2.5kW motor

HYDRAULIC ON-LINE AUTOMATIC BELLING UNIT for one pipe end*

(*on demand: for both ends -- but in this case, with operator intervention)

• interchangeable tooling for two pipe diameters 

_

PIPE SHRINK-WRAPPING EQUIPMENT for 3 to max. 6 pipes

-- including:

• pipe accumulation table with sensors for parts-count and an air operated part separator
• pipe pack preparation section > a belt conveyor with cut-stress resistant carpet and an air operated pipe head jogger
• auto. shrink-wrapping machine with pipe entry belt conveyor and stopping blade
• wrapped pipe pack exit section, with an air operated system to move pack to an accumulation area
• an 'external' control panel to set the various parameters, including the number of pipes per-pack

GENERAL CONTROL PANEL.with: all pushbuttons for manual and, resp. automatic operation modes - "Schneider" Brand PLC - 'MODBUS TCP/IP' Communication Protocol - simple and intuitive HMI

ALL ELECTRICS, HYDRAULICS AND PNEUMATICS

SAFETY GUARDING TO 'CE'

In your requests for quotations, please specify:

a)  Type of process material/s

b)  Tensile strength min/max

c)  Yield strength min/max

d)  Material thickness min/max

e)  Diameter/s of pipes

f)  Pipe length min/max

g) Wanted "finish" of pipe ends

-